- 32%
Best seller

APC Power-Saving Back-UPS Pro 1200, 230V,BR1200GI

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare
  • High Performance Computer and Electronics UPS for Premium Power Protection

  • Includes: (2) Detachable IEC power cord, CD with software, Telephone cable, USB cable, User manual, Warranty card

EGP9,000.00 EGP6,080.00

Key Features

Run time for load
W
5m
Max. Capacity Used
100%
Output power capacity

720 Watts / 1.2kVA
Output Connections

(5) IEC 60320 C13 (Battery Backup)
(5) IEC 60320 C13 (Surge Protection)
(2) IEC Jumpers (Battery Backup)
Nominal Output Voltage

230V
Nominal Input Voltage

230V
Input Connections

IEC 60320 C14
APC Power-Saving Back-UPS Pro 1200, 230V
High Performance Computer and Electronics UPS for Premium Power Protection
Includes: (2) Detachable IEC power cord, CD with software, Telephone cable, USB cable, User manual, Warranty card
  • Adjustable voltage sensitivity
    Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points
    Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Battery replacement without tools
    Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Battery-protected and surge-only outlets
    Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR)
    Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Dataline surge protection
    Provides protection of connected equipment from power surges on the data lines.
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • LCD graphics display
    Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Power-saving outlets
    Automatically cuts power to idle equipment to conserve electricity.
  • Resettable circuit breaker
    Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • Safety-agency approved
    The UPS is UL1778 Listed
  • Serial connectivity
    Provides management of the UPS via a serial port.
  • Telephone dataline surge protection
    Provides protection of connected equipment from power surges traveling on telephone lines.
  • Transformer-block spaced outlets
    Protect equipment with input transformer blocks without blocking access to other receptacles.
  • USB connectivity
    Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS Pro Features & Benefits

Availability

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Transformer-block spaced outlets

Protect equipment with input transformer blocks without blocking access to other receptacles.
Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.
Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Customizable voltage-transfer points

Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Customizable voltage sensitivity

Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Cold-start capable

Provides temporary battery power when the utility power is out.

Manageability

Audible alarms

Provides notification of changing utility power and UPS power conditions
USB connection

Use your PC to access additional power protection and management features for your UPS via a USB Port.
LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Disconnected battery notification

Warns when a battery is not available to provide backup power.

Protection

Battery and surge protected outlets

Back up and protect your hardware and data during power outages, surges and spikes.
Dataline surge protection

Provides protection of connected equipment from power surges on the data lines.
Surge only outlets

Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Marketing features

Battery-protected and surge-only outlets

Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost Automatic Voltage Regulation (AVR)

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Serviceability

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Simple battery replacement

Increases UPS availability by allowing quick, easy battery replacement.

Safety

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Output

Max Configurable Power (Watts)

720 Watts / 1.2kVA
Output Frequency (sync to mains)

50 Hz +/- 0.1 % For 50 Hz nominal Unsynchronised, 50 Hz Sync to mains, 60 Hz +/- 0.1 % For 60 Hz nominal Unsynchronised, 60 Hz Sync to mains
Load Crest Factor

3 : 1
Topology

Line interactive
Waveform type

Stepped approximation to a sinewave
Transfer Time

10 ms typical : 12 ms maximum

Input

Input frequency

50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations

156 – 300 Adjustable, 176 – 294V

Batteries & Runtime

Battery type

Lead-acid battery
Typical recharge time

8hour(s)
Replacement Battery

APCRBC124
Expected Battery Life (years)

3 – 5
RBC Quantity

1
Battery Charge Power (Watts)

23 Watts
Battery Volt-Amp-Hour Capacity

216
Runtime

View Runtime Chart

Communications & Management

Interface Port(s)

Optional Simple Signalling RS232 cable, USB
Control panel

Multifunction LCD status and control console
Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating

441Joules
Data Line Protection

RJ11 analog phone line for phone/fax/modem/DSL, RJ45 network line – 10/100/1000 Base-T Ethernet
Filtering

Full time multi-pole noise filtering : 10% of IEEE surge let-through : zero clamping response time: instantaneous

Physical

Maximum Height

301MM, 30.1CM
Maximum Width

112MM, 11.2CM
Maximum Depth

380MM, 38.0CM
Net Weight

11.6KG
Shipping weight

13.2KG
Shipping Height

387MM, 38.7CM
Shipping Width

238MM, 23.8CM
Shipping Depth

488MM, 48.8CM
Color

Black
Master Carton Units

1.0
Units per Pallet

24.0
SCC Codes

10731304268755

Environmental

Operating Temperature

0 – 40 °C
Operating Relative Humidity

0 – 95 %
Operating Elevation

0 – 9144meters
Storage Temperature

-15 – 45 °C
Storage Elevation

0 – 15240meters
Audible noise at 1 meter from surface of unit

45.0dBA

Conformance

Approvals

A-Tick, C-Tick, CE, GOST, GS Mark, Telepermit, TÜV
Equipment protection policy

Lifetime : 150000 euros, Lifetime : 200000 AUD, Lifetime : 75000 GBP
Standard warranty

2 years repair or replace, 3 years repair or replace for European Union countries

Sustainable Offer Status

RoHS

Compliant
PEP

Available in Documentation tab
EOLI

Available in Documentation tab

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “APC Power-Saving Back-UPS Pro 1200, 230V,BR1200GI”

Your email address will not be published. Required fields are marked *

Red Line Store
Logo
Compare items
  • Total (0)
Compare
0